To Next PageTo Next PageWhy can't I adjust the lens shift on my Panasonic Projector?
If you cannot adjust the lens shift on your Panasonic Projector, perform [LENS CALIBRATION]. Check if the Fixed-focus Lens (Model No.: ET?DLE055) is attached.
Why don't the control panel buttons work on my Panasonic Projector?
If the buttons on the control panel of your Panasonic Projector do not operate, verify that the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE] and that the terminal is not used for contact control.
How to troubleshoot Art-Net control issues on Panasonic PT-RZ990 Projector?
If you cannot control the Panasonic Projector with Art-Net, ensure that the connections between the twisted-pair-cable transmitter and an external device, and between the transmitter and projector are correctly done. Verify that [Art-Net SETUP] is set to other than [OFF], and that [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] are set correctly.
General| Matrix size | 0.67 \ |
|---|---|
| Projection technology | DLP |
| Supported aspect ratios | 16:10 |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 50 - 600 \ |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, vertical | -40 - 40 ° |
| Keystone correction, horizontal | -15 - 15 ° |
| Placement | Ceiling, Floor |
| Product type | Standard throw projector |
| Product color | Black |
| Housing material | Plastic |
| Built-in display | No |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 24000 h |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 920 W |
| Focus | Auto |
| Throw ratio | 1.71–2.41:1 |
| Zoom capability | Yes |
| Focal length range | 25.6 - 35.7 mm |
| Aperture range (F-F) | 1.7 - 1.9 |
| Vertical lens shift range | -16 - 50 % |
| Horizontal lens shift range | -10 - 30 % |
| BNC input ports | 6 |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| Noise level | 41 dB |
| Projection modes | Ceiling, Front, Rear |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 581 mm |
|---|---|
| Width | 498 mm |
| Height | 200 mm |
| Weight | 23100 g |
Covers essential warnings regarding electrical shock, moisture, and environmental hazards.
Provides warnings and compliance details related to laser light emission from the projector.
Details on safe power cord usage, voltage compatibility, and grounding requirements.
Covers safe practices for power connection, outlet usage, and preventing electrical hazards.
Guidelines for safe projector placement, ventilation, and operating environment conditions.
Warnings related to laser exposure, product modification, liquid contact, and accessory handling.
Covers intended use, cautions for transport, installation, and environmental conditions.
Covers usable outlets, installation modes, and projector orientation.
Guidance on connecting external devices like AV equipment and computers.
Covers power cord connection, removal, and projector power status indicators.
Guides through initial settings like focus, language, operation mode, and network configuration.
Instructions for adjusting focus, zoom, lens shift, and other image parameters.
Covers adjustments for picture mode, contrast, brightness, color, tint, and white balance.
Details on adjusting image shift, aspect ratio, zoom, clock phase, and geometry.
Covers projector ID, projection method, lens settings, operation modes, and synchronization.
Configuration for Ethernet type, Digital Link, Wired LAN, projector name, and network status.
Covers security password entry, change, display settings, and control device limitations.
Explains how to control and adjust the projector using a web browser.
Step-by-step guide for updating the projector's firmware via a wired LAN connection.
A guide to diagnosing and resolving issues like power, image, and remote control problems.
Technical specifications including power, light output, dimensions, and noise level.
