Powering ON/OFF
ENGLISH -
27
Basic Operation
Power indicator
The power indicator informs you the status of the power
. Conrm the status of the <Power indicator> before
operating the projector.
Indicator status Status
No illumination or ashing The power cord is unplugged.
RED
Lit
Press the ON/STAND-BY ( ) button to start the projection.
Flashing
The temperature inside the projector is abnormally high. The projector cannot be
turned on until cooling is completing and the POWER indicator stops blinking.
GREEN
Lit Projecting.
Flashing The projector is in the Power management mode.
To Next Page
Loading...
