Panasonic PT-VW330U

Image adjust
46
- ENGLISH
Settings
Red
Press ▲▼ to select [Red].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.3 )
Operation Adjustment
Adjustment
range
Press ►. deepen red tone
Maximum
value 63
Press ◄. lighten red tone
Minimum
value 0
Green
Press ▲▼ to select [Green].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.3 )
Operation Adjustment
Adjustment
range
Press ►.
deepen green
tone
Maximum
value 63
Press ◄.
lighten green
tone
Minimum
value 0
Blue
Press ▲▼ to select [Blue].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.3 )
Operation Adjustment
Adjustment
range
Press ►. deepen blue tone
Maximum
value 63
Press ◄. lighten blue tone
Minimum
value 0
Sharpness
Press ▲▼ to select [Sharpness].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the setting value.3 )
Operation Adjustment
Adjustment
range
Press ►.
increase the
sharpness of the
image
Maximum
value 15
Press ◄.
decrease the
sharpness of the
image
Minimum
value 0
Gamma
Press ▲▼ to select [Gamma].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to adjust the gamma value 3 )
to obtain a better balance of contrast.
Adjustments can be made between
z
0 and 15.
Noise reduction
Press ▲▼ to select [Noise reduction].1 )
Press the <SELECT> button to display 2 )
the adjustment dialog box.
Press ◄► to select the desired item3 )
off
Disabled
L1
Lower reduction
L2
Higher reduction
Noise interference on the screen can be
z
reduced. Select one of the following options to
get smoother images.
Noise reduction cannot be selected when 480p,
z
576p, 720p, 1035i or 1080i is selected.
Attention
When input video signal to the projector, Noise reduction
z
will become available.