Panasonic PT-VW330U

Technical Information
ENGLISH -
71
Appendix
J
Cable specications
[When connected to a computer]
Projector
1 NC NC 1
Computer (DTE
specications)
2 2
3 3
4 NC NC 4
5 5
6 6
7 7
8 8
9 9
J
Control commands
When controlling the projector from a computer, the following commands are available:
[Projector control command]
Command Control contents Remarks
PON Power [ON]
POF Power [OFF]
AUU Volume +
(Parameter)
000 (adjustment value 0) to 063 (adjustment value 63)
AUD Volume -
IIS INPUT selection
(Parameter)
VID = VIDEO
SVD = S –VIDEO
RG1 = COMPUTER 1 -RGB
RG2 = COMPUTER 2 -RGB
HD1 = HDMI
SCT = COMPUTER 1 -SCART
Q$S
Lamp condition
query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active
OSH AV MUTE function
Turning off the projection and sound temporarily.
Sending the command switches ON/OFF.
Do not switch ON/OFF in a short period of time.