Panasonic PT-VW330U

Basic operations by using the remote control
ENGLISH -
33
Basic Operation
Using the KEYSTONE button
This function allows you to correct keystone distortion.
button
If a projected picture still has keystone distortion after
pressing the <AUTO SET> button, correct the image
manually as follows:
Press the <KEYSTONE> button on the remote
control. The Keystone dialog box appears. Press
▲▼ to correct keystone distortion. The keystone
adjustment can be stored
(
Æ
page 49)
.
Operation Screen image
Reduce the
upper width
with press
▲
.
Reduce the
lower width
with press
▼
.
Note
The white arrows indicate that there is no correction.
z
A red arrow indicates the direction of correction.
z
An arrow disappears at the maximum correction.
z
If you press the <KEYSTONE> button on the remote
z
control once more while the keystone dialog box is being
displayed, the keystone adjustment will be canceled.
(
Æ
page 49)
The adjustable range is limited depending on the input
z
signal.
Using the INFO. button
This function allows you to display the information
menu.
button
Press <INFO.> button on the remote
control.
Note
For details, see “Input Source Information Display ” in
z
“Information” under Main menu. (
Æ
page 60)
Using the FREEZE function
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1