Panasonic PT-VW330U

Image adjust
ENGLISH -
47
Settings
Progressive
Press ▲▼ to select [Progressive].1 )
Press the <SELECT> button to display 2 )
the dialog box.
Press ◄► to select the desired item.3 )
An interlaced video signal can be displayed in
z
progressive mode. Select one of the following
options.
Progressive cannot be selected when 480p,
z
576p, 720p, 1035i or 1080i is selected.
Off
Disabled
L1
For an active picture
L2
For a still picture
Film
For watching a lm
Attention
When input video signal to the projector, Progressive will
z
become available.
Reset
To reset the adjusted data, all adjustments will return
to their previous gures.
Press ▲▼ to select [Reset].1 )
Press the <SELECT> button.2 )
A conrmation box appears and then select Yes.
z
Store
Press ▲▼ to select [Store].1 )
Press ► or the <SELECT> button.2 )
Press ▲▼ to select one from Image 1 3 )
to 4 and press the SELECT button.
A conrmation box appears and then select Yes.
z