Panasonic PT-VW330U - Settings - Screen Aspect Ratio; Ceiling and Rear Projection Modes

50
- ENGLISH
Settings
Screen
Ceiling
This function is used to project the image from a
ceiling-mounted projector.
Press ▲▼ to select [Ceiling] and then 1 )
press the <SELECT> button.
Press ▲▼ to change the image.2 )
When this function is set to On, the picture will
z
be top/bottom and left/right reversed.
Rear
This function is used to project the image from rear of
the screen.
Press ▲▼ to select [Rear] and then 1 )
press the <SELECT> button.
Press ▲▼ to change the image.2 )
When this function is set to On, the picture will
z
be left/right reversed.
Screen aspect (PT-VW330U
Only)
This function is used to project the image to a 4:3 or
16:9 projection screen.
Press ▲▼ to select [Screen aspect] 1 )
and then press the <SELECT> button .
Press ▲▼ to choose one from the 2 )
items as below.
Default(16:10)
16:10 is the aspect of the LCD
panel.
16:9
Set to a 16:9 projection screen.
4:3
Set to a 4:3 projection screen.
Attention
When the 4:3 function is selected, Natural wide is not
z
available in the AV screen.
When the 16:9 function is selected, Wide (16:9) is not
z
available in the AV screen.
Natural wide is not available when 720p,1035i or 1080i is
z
selected in the PC System Menu.
Reset
To reset the adjusted data, all adjustments will return
to their previous gures.
Press ▲▼ to select [Reset] and then
press the <SELECT> button
A conrmation box appears and then select Yes.
z