[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
All white → Color bars (vertical) → Color bars (horizontal) → White cross on the black background → Black cross on
the white background → Cross hatch → All white →...
f When you press the <MENU> button or <RETURN> button, it will exit the test pattern and return to the sub menu of
[PROJECT SETUP].
Note
f The initial setting is All white. The initial screen is Cross hatch if you have assigned it to the <FUNCTION> button.
[FILTER COUNTER]
This function is used to reset the lter use time and set the notication display.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
Displays the using time of the lter.
[TIMER]
Sets the timer when you want to display an alert message of lter replacement.
[FILTER COUNTER RESET]
Resets the lter counter.
Setting [TIMER]
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
f The items will switch each time you press the button.
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H] → [7000 H]
[FILTER COUNTER RESET]
1) Press as to select [FILTER COUNTER RESET].
2) Press the <ENTER> button.
f The [FILTER COUNTER RESET] screen is displayed.
3) Press qw to select [OK] and then press the <ENTER> button.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE ALL].
2) Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3) Press qw to select [OK] and then press the <ENTER> button.
f The [POWER OFF.] screen is displayed.
4) Press the <ENTER> button.
f The operation is disabled except for turning off the power.
Note
f The projector will enter into the standby status to reect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [EMULATE] and the setting values of [NETWORK/USB] cannot be returned to
the factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] →
[INITIALIZE]. (
Æ
page
97)
84 -
ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
To Next Page
Loading...
