Panasonic PT-VZ575N

[NETWORK/USB] menu
On the menu screen, select [NETWORK/USB] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (Æ page 53) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
Conrmation of the network information
When connecting the "Wireless Manager ME6.2", the dedicated application of iPad/iPhone/iPod touch/Android, or the
Miracast-certied device to a projector, the information such as the Network number of Wireless LAN, Projector name and
Network ID are required. You can conrm the information in the [STATUS] in the [NETWORK/USB] menu. (
Æ
page 97)
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
Switches the communication method automatically to DIGITAL LINK or Ethernet.
[DIGITAL LINK]
Fixes the communication method to DIGITAL LINK.
[ETHERNET]
Fixes the communication method to Ethernet.
Possible communication modes
Setting
Communication possible
Image transmission Ethernet RS-232C
[AUTO]
For DIGITAL LINK
l l l
For Ethernet
―
l
―
[DIGITAL LINK]
l l l
[ETHERNET]
―
l
―
l: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method of DIGITAL LINK or Ethernet.
When the projector is connected directly via Ethernet
1) Press as to select [DIGITAL LINK SETUP].
2) Press the <ENTER> button.
f The [DIGITAL LINK SETUP] screen is displayed.
3) Press as to select [DUPLEX(ETHERNET)].
4) Press qw to switch the communication method.
f The items will switch each time you press the button.
88 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu