[PROJECTOR SETUP]
Sub-menu item Factory default Page
[STATUS] - 75
[COMPUTER2 SELECT] [COMPUTER2 IN] 75
[PROJECTOR ID] [ALL] 75
[INITIAL START UP] [LAST MEMORY] 76
[PROJECTION METHOD] [AUTO] 76
[LAMP POWER] [NORMAL] 76
[ECO MANAGEMENT] - 77
[EMULATE] [DEFAULT] 78
[FUNCTION BUTTON] - 79
[AUDIO SETTING] - 79
[TEST PATTERN] - 80
[FILTER COUNTER] - 81
[DC OUT] [ON] 82
[INITIALIZE ALL] - 82
[SECURITY]
Sub-menu item Factory Default Page
[PASSWORD] [OFF] 83
[PASSWORD CHANGE] - 83
[TEXT DISPLAY] [OFF] 84
[TEXT CHANGE] - 84
[MENU LOCK] [OFF] 84
[MENU LOCK PASSWORD] - 84
[CONTROL DEVICE SETUP] - 85
[NETWORK]
Sub-menu item Factory default Page
[WIRED LAN] - 86
[PROJECTOR NAME] - 86
[NETWORK CONTROL] [ON] 86
[NETWORK STATUS] - 87
[INITIALIZE] - 87
Note
f Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f Sub-menu items and factory default settings differ depending on the selected input.
ENGLISH - 53
Chapter 4 Settings - On-screen menu
To Next Page
Loading...
