Setting the mode
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[COUNT UP]
Displays the elapsed time since the count was started.
[COUNT DOWN]
Displays the remaining time of the time set by [TIMER].
Setting the countdown timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to set the time.
f The time can be set in 1-minute increments from 1 to 180 minutes.
f The factory default value is 10 minutes.
Note
f [TIMER] can be set when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select the item, and press the <ENTER> button.
[START]
The count is started.
[STOP]
The count is stopped.
[RESTART]
The count is resumed.
[RESET]
The count is reset.
[EXIT]
The presentation timer function is ended.
f When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the lower
right of the projected image.
f When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed
at the lower right of the projected image.
Note
f Presentation timer operations are also possible by the <P-TIMER> button on the remote control. (Æ page 48)
f The security message set in the [SECURITY] menu → [TEXT DISPLAY] (Æ page 84) is not displayed when the elapsed time or
remaining time is displayed.
f The elapsed time or remaining time is not displayed when the menu screen is displayed.
f The start time becomes "000:00" when [MODE] is set to [COUNT UP].
f The start time becomes the value set at [TIMER] when [MODE] is set to [COUNT DOWN].
f The time gauge turns clockwise when [COUNT UP] is set, and turns counterclockwise when [COUNT DOWN] is set.
[OTHER FUNCTIONS]
The same function can be realized by operating the menu as an alternative of operating the remote control button.
ENGLISH - 73
Chapter 4 Settings - [DISPLAY OPTION] menu
To Next Page
Loading...
