Note
f For details of the image signals that can be used with the projector, refer to “List of compatible signals” (Æ page 123).
f This may not operate properly for some connected external devices.
[RGB-SYSTEM]
(Only for analog RGB signal input)
The projector automatically detects the input signal, but
the images may not be displayed properly depending on the
input signal. In that case, select the item according to the input signal.
1) Press as to select [RGB-SYSTEM].
2) Press the <ENTER> button.
f The [RGB-SYSTEM] screen is displayed.
3) Press as to select the signal and press the <ENTER> button.
f The selectable items differ depending on the input signal.
Items Resolution (dots)
Scanning frequency
Dot clock frequency
(MHz)
Horizontal (kHz) Vertical (Hz)
[1280x768/60] 1 280 x 768 47.7 60.0 80.1
[1366x768/60] 1 366 x 768 47.7 60.0 84.7
[1400x1050/60] 1 400 x 1 050 65.2 60.0 122.6
[1680x1050/60] 1 680 x 1 050 65.2 60.0 147.1
[1440x900/50] 1 440 x 900 46.3 50.0 87.4
[1600x900/50] 1 600 x 900 46.3 50.0 97.0
[1440x900/60] 1 440 x 900 55.9 60.0 106.5
[1600x900/60] 1 600 x 900 55.9 60.0 119.0
Note
f It may not work properly for some connected external devices.
58 - ENGLISH
Chapter 4 Settings - [PICTURE] menu
To Next Page
Loading...
