25
6 Operating Instructions
6.1. Removing of disc during abnomality
6.1.1. Using main unit key buttons.
6.1.1.1. When the power can be turned off.
1. Turn off the power and press & hold [SKIP FWD] button on remote and [OPEN/CLOSE] button on main unit for 5 seconds.
6.1.1.2. When the power cannot be turned off.
1. Press & hold the [POWER] button to turn off the power forcibly, then press & hold [SKIP FWD] button on remote and [OPEN/
CLOSE] button on main unit for 5 seconds.
6.1.2. Using service eject pin.
1. Turn off the power and remove AC cord.
2. Remove the Top Cabinet.
3. Remove BD Drive.
4. Insert Eject Pin (JZJ0484) into the hole on the bottom of BD Drive and slide the eject Pin in the direction of the arrow to eject
tray slightly.
5. Remove disc.
To Next Page
Loading...
