40
10 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the
service manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Top Cabinet
• Disassembly of AC Inlet P.C.B.
• Disassembly of Optical In P.C.B.
• Disassembly of Wireless Adapter P.C.B.
• Disassembly of Rear Panel
• Disassembly of Front Panel Block Assembly
• Disassembly of Panel P.C.B.
• Disassembly of Power Button P.C.B.
• Disassembly of Cradle Lid
• Disassembly of iPod Cradle Assembly
• Disassembly of iPod P.C.B.
• Disassembly of DVD Lid Unit
• Disassembly of Front Shield Unit
• Disassembly of BD Drive
• Disassembly of Main P.C.B.
• Disassembly of D-Amp P.C.B.
• Disassembly of Digital Amplifier IC (IC5100/IC5200)
• Disassembly of Power P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Switching Regulator IC (IC5701)
• Replacement of Rectifier Diode (D5702)
• Replacement of Regulator Diode (D5802)
• Replacement of Regulator Diode (D5803)
• Disassembly of Fan
To Next Page
Loading...
