81
Step 12 Flip the D-Amp P.C.B. and position it according to dia-
gram shown.
Step 13 Connect Fan Unit to connector (CN5401) on D-Amp
P. C. B. .
Step 14 Proceed to check and repair Side A of D-Amp P.C.B..
11.4. Checking & Repairing SMPS
P. C. B.
Step 1 Remove Top Cabinet.
Step 2 Release the 3 tabs.
Step 3 Release the 2 tabs at each side of the Front Panel Block
Assembly in the direction of arrow.
Step 4 Slightly move Front Panel Block Assembly forward.
To Next Page
Loading...
