46
Step 4 Detach 17P FFC at the connector (CN3001) on Wire-
less Adapter P.C.B..
Step 5 Remove 1 screw.
Step 6 Release 2 catches.
Caution: During assembling, ensure that Wireless Adapter
P.C.B. is seated properly at the locators & fully catched
onto Transmitter Chassis.
Step 7 Remove Wireless Adapter P.C.B..
10.7. Disassembly of Rear Panel
• Follow (Step 1) to (Step 6) of Item 10.3.
Step 1 Twist the Wire Clamper.
Step 2 Detach the fan unit connector (CN5401) on D-Amp
P. C. B. .
Step 3 Detach 13P FFC at the connector (CN2011) on Main
P. C. B. .
Step 4 Remove 8 screws.
To Next Page