Panasonic SA-BT230P - Front Panel Block Assembly Disassembly

47
Step 5 Release the tabs on both side of the Rear Panel in the
direction of arrow.
Step 6 Remove Rear Panel.
10.8. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”.
Step 1 Detach 15P FFC at the connector (CN1101) on Main
P. C. B. .
Step 2 Detach 22P FFC at the connector (CN2002) on Main
P. C. B. .
Caution: During assembling, ensure that 15P FFC is
dressed through Front Shield.
Step 3 Release the tabs on both side of the Front Panel Block
Assembly in the direction of arrow.
Step 4 Release 3 tabs.