65
Step 13 Lift up to remove Main P.C.B..
Caution: During assembling, ensure that Main P.C.B. is
seated properly at the locators.
10.18. Disassembly of D-Amp P.C.B.
• Follow (Step 1) to (Step 6) of Item 10.3.
• Follow (Step 1) to (Step 4) of Item 10.4.
Step 1 Lift Up 2 Wire Clampers.
Step 2 Detach 3P Wire at the connector (CN5401) on D-Amp
P. C .B . .
Step 3 Detach 6P Cable at the connector (CN5400) on D-Amp
P. C .B . .
To Next Page
Loading...
