68
Caution: During assembling, ensure that heatsink spacer
is seated properly onto Amp Heatsink.
Caution: Ensure that D-Amp P.C.B. is properly located and
fixed on to Amp Heatsink before screwing.
Step 5 Fix 3 screws.
Note: For assembling of others Digital Amplifier IC (IC5200),
repeat the (Step 1) to (Step 5) of 10.19.2.
10.20. Disassembly of Power P.C.B.
• Follow (Step 1) to (Step 6) of Item 10.3.
Step 1 Release 2 catches.
Step 2 Remove Power P.C.B..
Caution: During assembling, ensure that Power P.C.B. is
properly inserted & fully connected to SMPS P.C.B..
10.21. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Release the 2 tabs at each side of the Front Panel in the
direction of arrow.
Step 2 Release the 3 tabs at the Bottom Chassis.
To Next Page
Loading...
