Demonstration lock/
unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by Main unit
initialization of service mode.
*When lock the tray.
LOCK is displayed for 3 seconds.
Note:
When a disc is not in tray, this
setting is not effective.
*When unlock the tray.
UNLOCK is displayed for 3 sec-
onds.
*When press OPEN/CLOSE key
while the tray being locked.
Display LOCK for 3 seconds.
Press [OPEN/CLOSE] key while the
tray is being locked.
Progressive initialization The progressive setting is initialized to Inter-
lace.
The display before execution
leaves.
When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.
Item FL display Key operation
Mode name Description Front Key
When the power is on, press
[PLAY] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
When the power is on, press
[PLAY] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.
When the power is on, press &
hold [SKIP REV] on remote control
follow by [POWER] on main unit.
Micro-P version check To check for main & sub firmware version
no., model no. & date of production.
FL Display
(i)
(ii)
(iii)
(iv)
M-XXXX
S-YYYY
AA/BB/CC
ZZZZZZ
Main Firmware Version
Sub Firmware Version
Date
Model No.
To Next Page
Loading...
