57
Caution: Ensure that the Shaft B of DVD Lid Unit is fully
inserted into Slot B of Front Panel.
10.15. Disassembly of Front Shield
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Remove 2 screws.
Step 2 Remove 2 screw.
Note: Replace the Gaskets if broken.
Step 3 Slightly lift up the Front Shield to release 2 catches at
both sides.
Step 4 Remove Front Shield.
Caution: During assembling, ensure that Front Shield is
properly inserted & fully catched onto the Bottom Chassis.
10.16. Disassembly of BD Drive
• Follow (Step 1) to (Step 6) of Item 10.3.
• Follow (Step 1) to (Step 6) of Item 10.8.
• Follow (Step 1) to (Step 4) of Item 10.15.
Caution: Pairing of BD Drive and Main P.C.B. as “BD Drive
& Main P.C.B. Assembly” have to be replaced together. If
either BD Drive or Main P.C.B. is changed, BD Drive unit
has to carry out re-adjustment due to alignment data for
BD Drive Unit is stored in the Main P.C.B.
Step 1 Detach 45P FFC at the connector (P55001) on Main
P. C .B . .
To Next Page
Loading...
