Panasonic SA-BT230P

80
11.3.2. Checking & Repairing of Side A of
D-Amp P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Lift up the Wire Clamper.
Step 3 Detach the Fan Unit connector (CN5401) on D-Amp
P. C. B. .
Step 4 Twist the Wire Clamper to release 6P Cable.
Step 5 Remove 2 screws.
Step 6 Remove 6 screws.
Step 7 Remove Fan Unit according to arrow shown.
Step 8 Release tab at the side of the Rear Panel in the direc-
tion of arrow.
Step 9 Twist the Wire Holder.
Step 10 Release Red(TL10) & Black(TL20) wires from the Wire
Holder.
Step 11 Remove AC Inlet P.C.B..