50
Step 2 Lift up the Power Button P.C.B..
Step 3 Desolder the 4P Cable (H6803) on Power Button
P. C. B. .
Step 4 Remove Power Button P.C.B..
• Assembly of Power Button P.C.B.
Step 1 Solder 4P cable on Power Button P.C.B..
Step 2 Fix the Power Button P.C.B. onto the Front Panel.
Caution: Ensure that it is properly located & seated prop-
erly.
Step 3 Fix 1 screw.
Step 4 Dress the 4P cable against the Top Wall of Front Panel.
To Next Page