Panasonic SA-PM53E - Page 130

Pin No. Mark I/O Function
57 M2_R O Changer Motor 2
Reverse Control
58 M2_F O Changer Motor 2
Forward Control
59 REC O When record circuit is
operatingDURING
RECORDING = H
60 N.C. O No Connection
61 PHOTO I PHOTO (SG Mechanism
only)
62 VCC - Power Supply ( +5V )
63 EE_DAT I/O EEPROM DATA
64 VSS - Ground ( 0V )
65 DMT O Deck Mute at mecha
transitionL=mute OFF, H
=mute ON
66 N.C. - No Connection
67 ASP_CLK O ASP CLK
68 ASP_DAT O ASP DATA
69 N.C. - No Connection
70 RDS_DAT - No Connection
71 RDS_CLK - No Connection
72 RDS_RDY - No Connection
73 N.C. - No Connection
74 N.C. - No Connection
75 MOTOR - MOTOR
76 PLUNGER - PLUNGER
77 N.C. - No Connection
78 HP_SW - HP_SW
79 REST_SW - REST_SW
80 CD_RST O CD Reset Output
81 N.C. - No Connection
82 N.C. I No Connection
83 N.C. - No Connection
84 N.C. I No Connection
85 P_MTR_R O H.Bass LED Control
86 P_MTR_L - No Connection
87 TRE_JOG O MOTOR Control OutputL
=OFF, H=ON
88 BASS_JOG O Deck PLUNGER Control
OutputL=OFF, H=ON
89 DECK_AD1 I DECK AD Input 1
90 DECK_AD2 I DECK AD Input 2
91 REG 1 I Region Setting 1
92 KEY3 I KEY3 INPUT
93 KEY2 I KEY2 INPUT
130