27
6.3. Self-Diagnostic Mode
Delete Error
Codes
Error code
information
System will perform a check on
any unusual/error code from the
memory
Error code will display
Example:
In self-diagnostic mode,
press [STOP] on remote
control.
To exist, press [ / ]
on main unit or remote
control.
Self-Diagnostic
Mode
To enter into self-diagnostic checking
Press & hold [STOP] on main
unit, follow by [4] then [9] on
remote control. (When no
disc in mechanism)
System will clear all of the contents
of unusual/error code from the
memory
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
In self-diagnostic mode,
press [CANCEL] on remote
control.
To exist, press [ / ]
on main unit or remote
control.
To Next Page
Loading...
