Panasonic SA-PT480PH - 9 Assembling and Disassembling of Traverse Unit; 9.1 Disassembly of Traverse Unit; 9.2 Assembly of Traverse Unit

74
9 Assembling and Disas-
sembling of Traverse Unit
9.1. Disassembly of Traverse Unit
• Refer to “Disassembly of DVD Mechanism Unit
(DLS6E)”
Step 1 Release the guide and slide the traverse slide plate (rib)
as arrows shown.
Step 2 Lift up the Traverse unit approximately 45° as shown.
Step 3 Slide out the Traverse unit as arrow shown.
Caution: Do not touch the surface of the Traverse unit and
place it so that the OPU is on top.
9.2. Assembly of Traverse Unit
Step 1 Release the guide and slide the traverse slide plate (rib)
as arrows shown.