57
Caution: During assembling, dress 1P Ground Wire
according to diagram shown.
8.16. Replacement of DVD Lid Unit
• Refer to “Disassembly of Front Panel Block Assembly”
8.16.1. Disassembly of DVD Lid Unit
Step 1 Push backward the Shaft B of the DVD Lid Unit in the
direction of arrow.
Step 2 Push forward the Shaft B of the DVD Lid Unit in the
direction of arrow.
Step 3 Lift the DVD Lid Spring at Shaft A in the direction of
arrow.
Step 4 Move the Shaft A of the DVD Lid Unit in the direction of
arrow.
Step 5 Remove DVD Lid Unit.