47
8.8. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”
Step 1 Remove 2 rivets.
Caution: Keep the rivet in safe place, place it back during
assembling.
Step 2 Detach 15P FFC at the connector (CN2007) on Main
P. C. B ..
Step 3 Detach 22P FFC at the connector (CN2002) on Main
P. C. B ..
Step 4 Detach 8P FFC at the connector (CN2000) on Main
P. C. B ..
Step 5 Detach 5P wire at the connector (FP9001) on Main
P. C. B ..
Step 6 Remove 1 screw to release 1P Ground Wire.
Caution: During assembling, ensure that 1P Ground Wire
is positioned properly before screwing.
Step 7 Release the 2 tabs at each side of the Front Panel Block
Assembly in the direction of arrow.
Step 8 Release the 3 tabs at the Bottom Chassis.
To Next Page
Loading...
