Panasonic SA-PT480PH - 8.17 Disassembly of Front Shield Unit

59
Caution: Ensure that the Shaft B of DVD Lid Unit is fully
inserted into Shaft B of Front Panel.
8.17. Disassembly of Front Shield
Unit
• Refer to “Disassembly of Front Panel Block Assembly”
Step 1 Remove 2 screws.
Step 2 Remove 2 screws.
Note: Replace the Gaskets if broken.
Step 3 Slightly lift up Front Shield Unit to release 2 catches at
both side.
Step 4 Remove Front Shield Unit.