34
6.6.3. Process Flow (3/3)
Update software
(Opecon)
1. Update Failed
2. Update Completed
If Opecon software update fail:
If Opecon software update
completes successfully:
Update stop.
The theater set can’t work,
and can’t be recovered by
CD update again.
The theater set wll reboot
automatically.
FL Display 3: "FAIL" .
GUI Display 3:
"UPDATE FAIL"
FL Display 3: "GOOD" .
Open the tray and take out
the CD, the update procedure
has been finished successfully.
Power off, then remove
AC Cord.
GUI Display 3:
COMPLETED
PLEASE EJECT THE DISC
GUI Display 4:
FL Display 4:
GUI Display 5:
FL Display 5:
3
FL/ GUI Display Remarks
Item
DescriptionProcess
To Next Page
Loading...
