52
Step 2 Slightly push the Cradle Lid inward.
Step 3 Slightly lift up the Cradle Lid.
Step 4 Rotate the Cradle Lid about 45° according to the dia-
gram shown.
Step 5 Remove Cradle Lid.
8.11.2. Assembly of Cradle Lid
Caution: During assembling, replace Cradle Lid Damper if
broken. Ensure it is properly pasted & fully pressed onto
Cradle Lid.
Step 1 Insert the Cradle Lid (Shaft A) into the Front Panel (Slot
A & Hole B).
To Next Page
Loading...
