66
Step 7 Remove 5 screws on SMPS P.C.B..
Step 8 Release P.C.B. Spacer by using long nose plier.
Caution: During releasing P.C.B. Spacer, avoid touching
the transformer & surrounding parts as it may lead to elec-
tric shock or injuries due to high temperature.
Step 9 Lift up SMPS P.C.B.in the direction of arrow.
Step 10 Upset the SMPS P.C.B. according to diagram shown.
Step 11 Desolder Black Wire (TL21) and Red Wire (TL11) on
solder side of SMPS P.C.B..
Step 12 Desolder Blue Wire (TL4) and White Wire (TL3) on sol-
der side of SMPS P.C.B..
Step 13 Remove SMPS P.C.B..
To Next Page
Loading...
