81
Step 9 Twist the Wire Clampers to release 6P (SMPS P.C.B. to
D-Amp P.C.B.) & 10P (SMPS P.C.B. to Main P.C.B.) cables.
Step 10 Remove 5 screws on SMPS P.C.B..
Caution: During releasing P.C.B. Spacer, ensure that long
nose plier avoid touching the electrical components.
Step 11 Release P.C.B. Spacer by using long nose plier.
Step 12 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Step 13 SMPS P.C.B. can be checked & repaired as diagram
shown.
To Next Page
Loading...
