15.4. DVD/CD Self-Diagnosis Error Code Description
Error Code State, Conditon Cause, Troubleshooting
H15 The disc tray cannot be opened: it closes spontaneously. Disc tray open/close detection switch (S1001) failure.
(Check and replace)
H16 The disc tray cannot be closed: it opens spontaneously.
Error Code Meaning Details
U. H. Error
U11 Focus servo failure
H01 Tray loading failure
H02 Spindle servo failure (Spindle servo, DSC, SP motor, CLV servo failure)
H03 Traverse motor failure
H04 Tracking servo error
H05 Seek timeout failure
H06 Power supply error
DSC system
F500 DSC failure DSC stops due to servo failure.
(Startup, focus failure, etc.)
F501 DSC not Ready failure Communication failure between DSC and system computer
(No communication because DSC does not move)
F502 DSC Time out failure See F500.
F503 DSC communication failure Communication failure (Result failure occurs after communication
command is transmitted.)
F505 DSC Attention Error See F500.
F506 Invalid media Disc is placed upside down; TOC is unreadable or invalid disc is
inserted.
Disc Code
F103 Ilegal highlight position Disc standard is possibly illegal when highlight is displayed.
IIC Error
F4FF Forced initialization failure (Time out)
F880 Unsuitable task number When a message arrives from not existing task
F890 A message is sent during AV task transmission During transmission of a message to AV task
F891 Unable to transmit a message to AV task When transmission of a message to AV task starts
F893 DVD Module problem Check for firmware version
F894 EEPROM failure
F895 Firmware compatibility problem Check for firm version for Main & DVD Module P.C.B.
F897 Initialization is not done properly Follow proper steps for initialization & reset
F8A0 Unsuitable message command When transmission of a message to AV task starts
15.5. Error Codes Stored During No Play
Error Code Meaning System Computer Item Setting Task Internal error in system
computer
F0BF 6) Unable to replay due to physical layer
identification failure
PCND_NOPLAY_PHYSICAL 0x50 DriveManager 0xD0BF
F0C0 8) DVD: Unable to replay due to no DVD
Video/Audio/VR
PCND_NOPLAY_VIDEO 0x70 DiscManager 0xD0C0
F0C1 9) DVD: Prohibited due to illegal regional
code
PCND_NOPLAY_RCD 0x80 DiscManager 0xD0C1
F0C2 A) DVD: No replay due to PAL system PCND_NOPLAY_PAL 0x90 DiscManager 0xD0C2
F0C3 B) DVD: All title replay prohibited in parental
setting
PCND_NOPLAY_PTL 0xA0 DiscManager 0xD0C3
F0C4 C) VCD: Prohibited due to PHOTO CD
format
PCND_NOPLAY_PHOTOCD 0xB0 DiscManager 0xD0C4
F0C5 D) VCD/CD: Prohibited due to CD-ROM
without CD-DA
PCND_NOPLAY_CDROM 0xC0 DiscManager 0xD0C5
15.6. Mode Table 2
Following modes are available with combinations of the pressed buttons on the player and on the remote controller unit.
26
SA-VK91DGCS / SA-VK91DGCP
To Next Page
Loading...
