To Next PageTo Next PageWhy does my Panasonic Home Theater System sound stop and display 'F61'?
If the sound stops and 'F61' appears on the display of your Panasonic Home Theater System, it could be due to straining of the speakers through excessive volume or power, or using the system in an extremely hot environment.
How to fix no DTS audio output on Panasonic SC-HTR310 Home Theater System?
If there is no DTS audio output from your Panasonic Home Theater System, set the DTS Digital Audio Output setting on the DVD player, Blu-ray Disc player or DVD recorder to 'Bitstream'. Also, set 'DTS' in 'Setting input signals'.
Why I cannot use Dolby Virtual Sound Speaker, Dolby Pro Logic or SFC on Panasonic SC-HTR310?
If you cannot use Dolby Virtual Sound Speaker, Dolby Pro Logic or SFC on your Panasonic Home Theater System, it may be because you cannot use these features with PCM signals with sampling frequency over 48 kHz, so make analogue connection to AUX3. Also, you cannot use for Dolby Digital dual sounds.
What to do if there is no sound or image after playback starts on Panasonic SC-HTR310 Home Theater System?
If you experience no sound or image after playback starts on your Panasonic Home Theater System, check connections to other equipment, set 'DIG ' or 'ANLG ' in 'Setting input signals', set 'AUTO' in 'Setting input signals', or turn the system off then on again. The system cannot playback PCM signal with sampling frequency over 96 kHz.
How to resolve sound cut off with HDMI on Panasonic SC-HTR310?
If you are experiencing cut off of the first few seconds of sound when using an HDMI connection with your Panasonic Home Theater System, change the audio output setting on the Blu-ray Disc player, DVD recorder or DVD player from 'Bitstream' to 'PCM'. Also, change input signal setting to 'PCM' in 'Setting input signals'.
How to fix no sound from microphone input on Panasonic SC-HTR310?
To get sound from the microphone input on your Panasonic Home Theater System, change the connection to the DVD player to an analogue connection or make an analogue connection to AUX3.
How to enable surround sound on Panasonic Home Theater System?
To get sound in surround mode on your Panasonic Home Theater System, set to Dolby Virtual Speaker, Dolby Pro Logic or SFC.
General| Brand | Panasonic |
|---|---|
| Model | SC-HTR310 |
| Category | Home Theater System |
| Language | English |
Essential safety instructions for connecting the AC mains lead, including fuse replacement and wiring details.
Guidelines for safe placement, voltage, AC mains lead handling, foreign matter, and servicing.
Instructions for battery insertion, remote signal sensor, and basic remote control usage.
Detailed steps for assembling the rack, installing panels, shelves, and doors.
Instructions for making fundamental connections using HDMI, AV, and digital audio cables.
Understanding Dolby Virtual Speaker, Dolby Pro Logic II, and SFC for enhanced audio experiences.
Solutions for issues including power, sound, remote control, and HDMI connectivity problems.
