164
When the following
conditions happen
Causes Solutions
Abnormal sounds
on the blade
ő There is a clearance between the blade and the shaft.
(The front end moves by 3 cm or so)
Plug into the
outlet, the
current time on
display is
Đ0:00đ
ő The lithium battery is at the end of its working
life.
＊ Before replacement of battery, operations can be
continued with plug inserted. However, it is
necessary to install the battery base in advance.
(Otherwise, foreign matter may enter)
＊ Set the current time whenever you use the timer
functions.
Replace the battery. (P. 89)
Powders still
remain and
baking does not
occur
ő
Have you forgotten to install the blade?
Install the blade. (P. 98)
ő
Is the blade shaft excessively fastened in the
bread pan so that it can’t move?
Please replace the main shaft
bearing if the blade shaft does not
rotate.
Please consult your Panasonic
customer service centre
Dough is leaking
out at the
bottom of the
bread pan
ő
A small amount of dough leaks out from the
discharge port of the bread pan during operations.
To avoid affecting
the rotations, the
dough that enters
the rotational part
will be discharged.
This is normal.
Please confirm if the
blade is rotating.
The bottom of
the bread pan
turns black
ő
The bottom of the bread pan may turn black due to friction when kneading.
In that case, please wipe and clean with a damp kitchen towel.
Damage on inner
lid’s coating
ő
Contact between inner lid and the bread due to excessive swelling may damage
the inner lid’s coating. Please rest assured that there is no harm to health & product
performance. Wipe inner lid with well-wrung cloth shortly after bread making.
ő Smoke or odors may occur upon initial use. However, they will disappear some time after use. Operations are not affected.
Discharge port
(4 positions)
At the bottom of the
bread pan
Shaft
( )
()
(
)
Troubleshooting
Please confirm the following issues first.
If any anomaly is still identified, please
contact Panasonic customer service
centre immediately.
To Next Page
Loading...
