Others
106
VQT1P61
The indication
disappears.
The screen is
frozen.
No operation can
be performed.
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is
connected to a computer.
≥ Turn off the power to this unit. If the power cannot be
turned off, remove the SD card then press the RESET
button or remove the battery or AC adaptor and then
reattach it. After that, turn on the power again. If
normal operation is still not restored, detach the
power connected, and consult the dealer who you
purchased this unit from.
“PUSH THE RESET
SWITCH.” is
displayed.
≥ The unit has automatically detected an error. To
protect the data, remove the SD card and then press
the RESET button with a pointed object. This will
restart the unit.
≥ If you do not press the RESET button, the power to
this unit is turned off automatically about 1 minute
later.
≥ Even after you press the RESET button, the indication
may still appear repeatedly. If so, this unit needs
repair. Detach the power connected, and consult the
dealer who you purchased this unit from. Do not
attempt to repair the appliance by yourself.
If the SD card is
inserted in another
device, it is not
recognised.
≥ Check that the device is compatible with the capacity
or type of SD card (SD Memory Card/SDHC Memory
Card) that you inserted.
# Refer to the operating instructions of the device for
details.
Problem Check points
SDR-S9-VQT1P61_eng.book 106 ページ ２００７年１２月１８日 火曜日 午後３時５９分
To Next Page
Loading...
