Others
107
VQT1P61
With a computer
Problem Check points
Even if connected
by the USB cable,
this unit is not
recognised by the
computer.
≥ The USB function selection screen does not appear if
the USB cable is connected while the menu screen is
displayed.
# Close the menu screen before connecting the USB
cable.
≥ Is the AC adaptor connected?
# Use the AC adaptor when connecting the unit and a
computer.
≥ Select another USB terminal on the computer.
≥ Check the operating environment. (l 80)
≥ Disconnect the USB cable, turn the unit off then on
and then reconnect the USB cable.
When the USB
cable is
disconnected, an
error message will
appear on the
computer.
≥ (For Windows)
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
≥ (For a Macintosh)
When the drive icon is displayed on the desktop, drag
the icon into the Trash and then disconnect the USB
cable.
Cannot see the PDF
operating
instructions for
MotionSD STUDIO
1.3E.
≥ Is Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later installed on the computer that you are
using?
# You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for MotionSD STUDIO 1.3E.
SDR-S9-VQT1P61_eng.book 107 ページ ２００７年１２月１８日 火曜日 午後３時５９分
To Next Page
Loading...
