Panasonic TH-65PF12EK - Removal of HX-Board; Removal of DS-Board; Removal of PB-Board

22
TH-65PF12EK
9.5. Removal of HX-Board
1. Remove the HA Terminal Block and the HHH Terminal
Block.
(Refer to Removal of HA-Board and HHH-Board)
2. Remove 1 screw ( ).
3. Remove 6 screws ( ) and then remove the Slot Case.
4. Disconnect the connector (HX1).
5. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
9.6. Removal of DS-Board
1. Remove the Slot Case.
(Refer to Removal of HX-Board)
2. Disconnect the connector (DS14).
3. Remove 10 screws and then remove the Fixed Plate.
4. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
5. Remove the flexible cables from the connectors (DS1,
DS3).
6. Remove 3 screws and then remove DS-Board.
9.7. Removal of PB-Board
1. Disconnect the connectors (PB30, PB32, PB33, PB34,
PB36, PB37, PB38).
2. Remove 3 screws and then remove PB-Board.