6 Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be
adjusted by remote control in Service Mode.
6.1. How to enter SERVICE 1
1. In sound menu, set BASS to MAX, and set TREBLE to MINIMUM.
2. Simultaneously press RECALL button on remote control and VOLUME DOWN button [ - ] on the TV set.
6.2. How to enter SERVICE 2
1. Set the channel to CH99.
2. Press HOLD button on remote control.
Note:
To exit to Service mode, press N or Power button on remote control.
15
TX-51P950M / TX-51P950X / TX-43P950M / TX-43P950X
To Next Page
Loading...
