Stand Assembly (Sold Separately)
Included Parts
Check that the following parts are included with the stand (KX-BP061).
No. Part Name Illustration Q'ty
Stand Base 2
Support Beam 2
Side Bar (A) 2
Side Bar (B) 1
Screw (M6 ´ 45 mm [1
3
/4 in.])
10
Two-wing Bolt (M5 ´ 12 mm [
1
/2 in.])
2
Support Bracket 2
Fall-prevention Extension Leg 4
Screw (M6 ´ 60 mm [2
3
/8 in.])
4
Nut 4
Wrench
*1
1
Washer 10
*1
The included wrench is necessary for tightening and loosening the screw (
), so keep it in a safe location.
Operating Instructions (For Basic Operations) 37
1
Installation Manual
To Next Page