76
Recording (Dubbing) Images from Other Video Cameras
You can record (dub) images from other video cameras on a disc or card in DVD Video Camera. Use the AV/S input/
output cable (provided) to connect the DVD Video Camera to the other video camera.
*1: The AV/S input/output cable provided with this DVD Video Camera can be directly connected to some video
cameras.
*2: For relay adapters, JVC VZ-97 (a set of 3 adapters) and Audio-Technica ATL4C32M and PGF-517 (a set of 2
adapters) are generally available.
*3: If the video camera to be connected has an S-VIDEO output jack, you can connect it to the DVD Video Camera
(VDR-M70PP only).
1 Set the input source on the
DVD Video Camera to
“LINE (L IN)”.
Switch the input referring to
“Input Source” on page 88.
Choose “S LINE” to input S-VIDEO signal (Only
for VDR-M70PP).
2 Turn on the connected device, and start playback.
The picture will appear on the LCD screen or
viewfinder of this DVD Video Camera.
3 Press the REC button.
Recording will start on this DVD Video Camera.
The operation of this line-input recording is the same
as for recording movie.
Note:
• With VDR-M70PP, using S-VIDEO will enable you to
record clearer images.
• Reduce the volume of external input sound heard from
the built-in speaker: The loud volume may cause noise to
enter the recorded image.
• Still images can also be recorded on DVD-RAM disc or
card. See “Switching External Input Recording Method
(PHOTO Input)” on page 88 for details, and “Recording
Stills” on page 52 for how to record still images.
A/V
MIC
To S-VIDEO output jack of
video camera, etc.
8mm video camera, VHS
video camera, etc.
3 relay adapters
(generally available)
*2
Signal flow
AV/S input/output cable (provided)
*1
*3
8:00AM
SEP 3 0 2004
3 0 MIN
0:00:00
REM
FINE
L IN
To Next Page
Loading...
