EasyManua.ls Logo

Panasonic VL-SWD501 - Wire Type and Length

Panasonic VL-SWD501
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wire type and length
Wire type and length
Wiring run
Wire type*1
Diameter Length (Max.)
Wireless Camera - Power supply unit
φ
0.65 mm 22 AWG
50 m
φ
1.0 mm 18 AWG
100 m
Power supply unit - AC power source
φ 1.2 mm 17 AWG
No requirement
φ 2.0 mm 12 AWG
Camera - External sensor
φ 0.5 mm - φ 0.8 mm (24 AWG - 20 AWG)
According to specification of
connected device.
Must be no
φ
0.8 mm 20 AWG
longer than 20 m.
*1 Type: Single-pair cable with outer sheath (jacket)
Conductor: Copper solid
Outer diameter ,: φ 8 mm (Max.)
A certified power supply wiring has to be used with this equipment.
The relevant national installation and/or equipment regulations shall be considered.
A certified power supply wiring not lighter than ordinary polyvinyl chloride flexible wiring according to IEC60227 shall be used.

Table of Contents

Related product manuals