Registering the wireless sensor camera to the main monitor station
From the top menu, touch . Touch [Register/Cancel] → [Register].
Touch [Camera].
Main monitor station operations
Main monitor station operations
Touch .
Register the wireless sensor camera after connecting it to a power supply.
Register 1 wireless sensor camera at a time. Multiple wireless sensor cameras cannot be registered at
the same time.
These operations are for VL-WD812EX model wireless sensor cameras. See the wireless sensor
camera’s manuals as required.
Touch the number of the wireless sensor
camera to be registered.
After this, use the wireless sensor camera
and complete the following steps within
about 5 minutes.
Step 1
Step 2
Step 3
Step 4
Step 5
Registering the wireless sensor camera
Registering the wireless sensor camera
To Next Page
Loading...
