1 Strip the wires.
2 Remove the water-resistant rubber (3) from the
wireless sensor camera and attach it to the wires.
3 Connect the wires to the terminals (4) and reattach
the water-resistant rubber and secure it in its original
position
•Insert the wires while pressing the terminal buttons with
the tip of a screwdriver.
12 mm
32 mm
Connect wires to the external input terminal.
(3)
(4)
If connecting an external sensor
Step 3
Close the cover (push closed until it clicks).
Screws
Screw covers
Attach the wireless sensor camera to the
wall mount bracket and secure it.
•After attaching the 4 screws, attach the
screw covers.
Step 4
Step 5
Installing Wireless Sensor Cameras
Installing Wireless Sensor Cameras
To Next Page
Loading...
