To end the operation, press
on the main monitor station.
Registering the wireless sensor camera to the main monitor station
Wireless sensor camera operations
Wireless sensor camera operations
•The register button is located behind the register button cover (1). Peel open the register
button cover and use the thin end of the sensor range cap removement tool to press and
hold the register button (2) for about 3 seconds. After this make sure to firmly close the
register button cover.
With the power connected to the wireless sensor camera, press the register button
on the rear side of the wireless sensor camera.
• The wireless sensor camera’s indicator lamp (3)
flashes in green during registration. When
registration is complete, a beep sounds and the
indicator lamp lights in green.
Step 6
Step 7
(2)
(1)
(3)
Main monitor station operations
Main monitor station operations
* Install a wireless sensor camera in a location where objects enter from side
This will allow it to better detect the heat of the moving object.
Registering the wireless sensor camera
Registering the wireless sensor camera
To Next Page
Loading...
