18 Configure the settings relating to the
schedules [Schedule]
On the “Schedule” page, it is possible to configure the settings relating to schedules as follows.
• Alarm permission (Alarm input will be received only in the specified schedule.)
• VMD permission (Video motion detection will be active only in the specified schedule.)
• Access permission (Access to the camera will be allowed only in the specified schedule.)
• H.264 recording (SD recording will be performed only in the specified schedule.)
The “Schedule” page has only the [Schedule] tab.
Up to 5 schedules can be set.
Operating Instructions 191
18 Configure the settings relating to the schedules [Schedule]
To Next Page
Loading...
