10.2 Configure the settings relating to the SD
memory card [SD memory card]
Click the [SD memory card] tab on the “Basic” page. (®page 51, page 53)
IMPORTANT
• When “VGA Quad streams [4:3]” is selected for “Image capture mode”, SD memory cards cannot be
used.
The settings relating to the SD memory card can be configured on this page.
SD memory card
[SD memory card]
Select “Use” or “Not use” to determine whether or not to use the SD memory card.
• Default: Use
Operating Instructions 61
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
