• The preset position must be configured again when the mounting position of “Image capture mode” is
changed (such as when changing from “<Ceiling>” to “<Wall>”). (®page 109)
Note
• When “<Ceiling>” is selected for “Image capture mode” (2M Double Panorama [16:9]/ 1M Double
Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Double Panorama + Quad PTZ/ Double
Panorama + Single PTZ), “Upside-down” settings can be configured on the [Basic] tab of the “Basic”
page.
• When “3M Fisheye [4:3]” is selected, some functions may be unavailable. (®page 199)
• When “VGA Quad streams [4:3]” is selected, some functions may be unavailable. (®page 199)
86 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
