Pantum P2200 Series Maintenance Manual

V
Regulatory Information
This symbol indicates that this product cannot be thrown away together with
other waste. Used electrical and electronic equipment must be sent to a
designated collection point for recycling.
This product is only suitable for indoor use.
European Community (EC) Directive Compliance
This product complies with the protection requirements related to the
electromagnetic compatibility and safety of electrical equipment (designed
for use within certain voltage limits), as issued in the Member States
Approximate and Coordinative Regulations of EU Directives 2004/108/EC
and 2006/95/EC.
This product is manufactured by: Zhuhai Seine Technology Co., Ltd., No.
3883 Zhuhai Avenue, Xiangzhou District, Zhuhai City, Guangdong
Province, People's Republic of China.
For information about the Compliance Statement for the requirements in
these directives, please obtain these from an authorized representative.
This product complies with the Class B range of EN 55022 and the safety
requirements of EN 60950.
This printer is fully compliant with ROHS Directive 2009/95/EC and the
revised directive 2011/65/EU's requirements for managing toxic and
hazardous substances.
This product is intended for safe use in non-tropical areas.
This product may only be safely used at altitudes of approx 6,500 ft (2,000
m) and below.

Pantum P2200 Series Specifications

General

Print Technology	Monochrome Laser
Max Print Resolution	1200 x 1200 dpi
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Printer Language	GDI
Processor Speed	600 MHz
Memory	64 MB
Connectivity	USB 2.0
Media Weight	60-163 g/m²
Compatible Operating Systems	Windows, Linux, Mac OS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8 seconds
Recommended Monthly Page Volume	250 to 2, 000 pages
Media Types	Plain, Cardstock, Label, Envelope, Thin
Media Sizes	A4, A5, A6, B5, Legal, Letter, Executive, DL envelope, C5 envelope, Postcard
Power Consumption	Average: 370W
Print Speed	Up to 20 ppm